大发平台大全网站-大发welcome登录入口

山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
热线电话:400-879-1999
您现在所在的位置: 首页> 大发平台大全网站 > 行业新闻 >

自上料搅拌机内水箱漏水如何快速处理?

所属分类:行业新闻 发布时间:2020-08-07 来源: 浏览量:18

  感谢您在百忙的时间来观看我们的网站信息,接下来呢,我们就来一起来学习更多关于全自动上料搅拌机的信息吧,您喜欢的话就快来看一看!
  Thank you for your busy time to watch our website information. Next, let's learn more about the automatic charging mixer. If you like, please have a look!
  自上料搅拌机内漏水处不超过1mm裂缝或2mm的孔洞时,向水箱中加入一瓶水箱强力堵漏剂,发动搅拌车运转。
  Add a bottle of water tank strong plugging agent into the water tank when the water leakage in the charging mixer does not exceed 1 mm crack or 2 mm hole, and start the mixer truck to run.
  打开冷却水开始大循环后5~10分钟,冷却系统中不论是水箱还是橡胶管及各处垫,有漏水(或防冻液)处都会停止泄漏,止漏后不需要放出,不会影响散热和发生堵塞。
  5-10 minutes after opening the cooling water to start large-scale circulation, the water tank, rubber pipe and all pads in the cooling system will stop leaking if there is water leakage (or antifreeze) in the cooling system. After stopping the leakage, it does not need to be discharged, which will not affect the heat dissipation and block.
                全自动上料搅拌机
  若无止漏剂携带时,对个别散热管轻微漏水,可临时用散烟丝放入水箱内,利用水循环压力,使烟丝堵塞在散热管的漏水处,暂时使用。自上料搅拌机对水箱散热管漏水较严重的,可将漏水的散热管从漏水处剪断,用涂上肥皂的棉花团堵住被剪断散热管,而后用钳子把被剪断的散热管头部夹扁再卷边压紧即可制止漏水。
  If there is no leak proof agent to carry, the individual heat pipe slight water leakage, can temporarily use loose tobacco into the water tank, use the water circulation pressure to make the cut tobacco block in the leakage of the heat pipe, for temporary use. If the water leakage of the radiator pipe of the water tank from the charging mixer is serious, the leaking heat pipe can be cut off from the water leakage place, and then the head of the heat dissipation pipe is clamped flat with pliers, and then the water leakage can be stopped by crimping and pressing.
  橡胶管接头漏水,可及时用螺丝刀将橡皮管接头卡子在橡皮管接头缠二道,而后用钳子拧紧。如橡皮管损坏,可用胶布把破裂之处包扎紧,暂时使用。
  If there is water leakage in the rubber pipe joint, the rubber pipe joint clip can be wrapped twice in the rubber pipe joint with a screw driver in time, and then the clamp is used to tighten it. If the rubber tube is damaged, the rupture can be wrapped up with adhesive tape for temporary use.
  以上是关于全自动上料搅拌机内水箱漏水如何快速处理的详细介绍,希望对大家有所帮助,想要了解更多内容请继续关注我们的网站。
  The above is about the automatic charging mixer water tank leakage how to deal with the details, hope to help you, want to learn more, please continue to pay attention to our Website.
热门产品 / HOT PRODUCT

 

首页 产品 电话 置顶
Baidu
sogou