大发平台大全网站-大发welcome登录入口

山东山汽工程机械(集团)有限公司
热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
热线电话:400-879-1999
您现在所在的位置: 首页> 大发平台大全网站 > 公司新闻 >

全自动搅拌车变速器油质如何检测?

所属分类:公司新闻 发布时间:2020-06-02 来源: 浏览量:18

  如何检查全自动搅拌车变速器油质量?
  How to check the transmission oil quality of the automatic mixer?
  1.将自动搅拌车停在水平地面上,拧紧手刹。
  1. Park the automatic mixer on the horizontal ground and tighten the handbrake.
  2.让发动机空转几分钟。
  2. Allow the engine to idle for a few minutes.
全自动上料搅拌车
  3.踩下制动踏板,将操纵杆移动到倒车、前进等位置,并在每个位置停留几秒钟,将变矩器和所有换档执行机构注满液压油。,将操纵杆移动到停车位置。
  3. Depress the brake pedal, move the control lever to the reverse, forward and other positions, and stop at each position for a few seconds, and fill the torque converter and all shift actuators with hydraulic oil. Finally, move the lever to the park position.
  4.从灌装管中取出自动变速器的卷尺,将清洗干净的卷尺全部插入灌装管中,然后拔出卷尺,检查卷尺上的油位。
  4. Take out the tape of automatic transmission from the filling pipe, insert all the cleaned tape into the filling pipe, then pull out the tape, and check the oil level on the tape.
  全自动搅拌车变速器油质的质量检测方法就是这样的,希望对您有所帮助。
  This is the quality inspection method of the transmission oil of the full-automatic mixer. I hope it can help you.
热门产品 / HOT PRODUCT

 

首页 产品 电话 置顶
Baidu
sogou